How to install recoveries in Coolpad note 3 and Note 3 Lite

How to install recoveries in Coolpad note 3 and Note 3 Lite

You can download recoveries for Coolpad Note 3 here

For Coolpad Note 3 Lite Go here

⤃ Flashify Method:

1.Use this method if you have already rooted your device. For root method Go here.

2.Now install flashify through google play.

3.Open it and accept & grant root access.

4.On flashify’s home screen,tap on “Recovery image”.

5.Select Choose a file.

6.Then file explorer. (Storage)

7.Select inteternal sd(sdcard0),External SD(sdcard1) where you have downloaded the recovery.img.

8.Select recovery.img.

9.Select YUP!.

10.REBOOT NOW.

 Spflashtool method:

1. Both drivers should be installed successfully on PC

2. Open spflashtool folder and paste "recovery.img"(for Coolpad Note 3)/ "recovery.img"(for Coolpad Note 3 Lite,rename it to recovery.img after download) and "MT6753_Android_scatter.txt"(for Coolpad Note 3)// "MT6735_Android_scatter.txt"(for Coolpad Note 3 Lite files into spflashtool folder.

3. Now right click on "flash_tool.exe" and run as administrator,after flashtool start,click on "scatter loading" and select "MT6753_Android_scatter.txt"(for coolpad note 3)/"MT6735_Android_scatter.txt"(for coolpad note 3 lite) .

4. Click on "download"(on left top side with green colour icon in spflash tool).

5. Now switch off phone and connect to Pc via USB cable.Press twice the volume up button. A slider will run on bottom of spflashtool. If everything fine then you will see a pop up with green tick.

6. Disconnect phone from PC. Press Volume up and Power button till recovery comes on the screen

7. Now you have successfully installed touch supported TWRP recovery.
How to Root Coolpad Note 3

How to Root Coolpad Note 3

As you all know that all rooting methods (Framaroot,Oneclickroot,Towelroot,360super root,adb methods etc) failed on coolpad note 3,so I am providing here working method to root CPN3.

Disclaimer : Please do it at your own risk, I am no way responsible if anything goes wrong or you ruin /brick your phone.Rooting Voids Warranty.

Root method without PC :

Downdload this Kingroot application, install it in your phone,open Kingroot app and root your phone. 

Root method through PC:

► Pre-requisites:

1.PC (Windows 7 preferable)

2. SP_Driver_V2.0 and driver_setup_150313 must be installed on your PC

3. Spflashtool


► Steps:

1.Download the below super su and recovery files:

Recovery

MT6753_Android_scatter.txt

SuperSU_v2.49.zip 

2. Now unzip drivers and spflashtool and install sp driver v2.0 and driver setup 150313.

3. Reboot your PC.

4. Paste "SuperSU_v2.49.zip" to internal storage of phone.

5. Open spflashtool folder and paste "recovery.img" and "MT6753_Android_scatter.txt" files into spflashtool folder. 

6. Now right click on "flash_tool.exe" and run as administrator,after flashtool start,click on "scatter loading" and select "MT6753_Android_scatter.txt" .

7. Click on "download"(on left top side with green colour icon in spflash tool).

8. Now switch off phone and connect to PC via USB cable.Press twice the volume up button. A slider will run on bottom of spflashtool. If everything fine then you will see a pop up with green tick.

9. Disconnect phone from PC. Press Volume up and Power button till recovery comes on the screen(This is important step,don't boot into normal mode,after flashing recovery you have to directly go to recovery mode by pressing Volume up + Power button simultaneously).

10. Select "Install"

11. Select SuperSU_v2.49.zip file

12. Swipe right to confirm flash

13. Reboot the device.

14. check root status with any root checker app.

Now voila!Phone is rooted.Cheers.

Note:Things to be noted
**Don't install any driver except above two,if installed already then uninstall driver and residuals using iobit uninstaller,reboot pc then install both drivers given above.

**During driver install click on "install anyway" on each popup

**Enable usb debugging on phone  
Settings → Developer options → tick on USB Debugging(In case you don’t see developer options in your settings ,Open Settings→”About phone” and tap “Build number”  7-8 times to get “You are now  Developer option”

**If quick boot enabled on phone,then disable that by unticking "Quick startup" option in "accessibility settings"


If you guys have any question feel free to comment below. :)

How to Flash stock ROM in Coolpad Note 3 Lite

Here is the guide for How to flash stock rom in Coolpad note 3.

➲ Important:

Backup all data and nvram.

➲ Warning : New black coolpad note 3 users  be careful.It is must to take full rom backup through twrp before you proceed (on external sd card).Many reported that this is not working on black and many reported working,so take precautions.

 Disclaimer : Please do it at your own risk, I am no way responsible if anything goes wrong or you ruin /brick your phone.

 Steps : 

1.Install both the drivers(windows 7 preferable)(It should be successfully installed all drivers)
2.Download sp flashtool and Stock ROM and extract them using 7zip
3.Open SP flashtool


4.Click Scatter Loading then select scatter file from downloaded stock ROM


5.Click on download -> switch off your phone and connect to PC



6.Wait till below green popup appears.

7.Now disconnect your phone & reboot.It will stuck on Fastmmi mode written "up down" on screen.
8.Download minimal ADBtool  and extract on your desktop.Install that.
9.Connect your device to the computer.    
10.Open the adb tool just installed and check device is listed or not by " adb devices " command.


11.Give this command “adb shell fctest system reboot”


12.Now phone is switched on,do the onscreen settings.

That's it guys. you have successfully installed stock rom in your coolpad note 3 Lite.

If you have any question feel free to comment below. :)

How to Flash stock ROM in Coolpad Note 3

Here is the guide for How to flash stock rom in Coolpad note 3.

➲ Important:

Backup all data and nvram.

➲ Warning : New black coolpad note 3 users  be careful.It is must to take full rom backup through twrp before you proceed (on external sd card).Many reported that this is not working on black and many reported working,so take precautions.

Disclaimer : Please do it at your own risk, I am no way responsible if anything goes wrong or you ruin /brick your phone.

Steps : 

1.Install both the drivers(windows 7 preferable)(It should be successfully installed all drivers)
2.Download sp flashtool and Stock ROM and extract them using 7zip
3.Open SP flashtool


4.Click Scatter Loading then select scatter file from downloaded stock ROM


5.Click on download -> switch off your phone and connect to PC



6.Wait till below green popup appears.

7.Now disconnect your phone & reboot.It will stuck on Fastmmi mode written "up down" on screen.
8.Download minimal ADBtool  and extract on your desktop.Install that.
9.Connect your device to the computer.    
10.Open the adb tool just installed and check device is listed or not by " adb devices " command.


11.Give this command “adb shell fctest system reboot”


12.Now phone is switched on,do the onscreen settings.

That's it guys. you have successfully installed stock rom in your coolpad note 3.

If you have any question feel free to comment below. :)