How to Root Coolpad Note 3 Lite

Disclaimer : Please do it at your own risk, I am no way responsible if anything goes wrong or you ruin or brick your phone. Rooting Voids Warranty.

► Root method without PC

(Good internet connection needed):(Not recommended,Do only if you are unable to root through supersu method)

⇒ Downdload this Kingroot application,install it in your phone,open Kingroot app and root your phone. 

► Root method with PC

(SuperSu method):(Recommended method)

⇨ Pre-requisites:

1.PC (Windows 7 preferable)

2. SP_Driver_V2.0 and driver_setup_150313 must be installed on your PC

⇨ Steps:

1.Download the below super su and recovery files:

2. Now unzip drivers and spflashtool and install sp driver v2.0 and driver setup 150313.

3. Reboot your PC.

4. Paste "" to internal storage of phone.

5. Rename downloaded recovery(twrp_cpnlite-sreejesh.img) to recovery.img 

Open spflashtool folder and paste "recovery.img" and "MT6735_Android_scatter.txt" files into spflashtool folder. 

6. Now right click on "flash_tool.exe" and run as administrater,after flashtool start,click on "scatter loading" and select "MT6735_Android_scatter.txt" .

7. Click on "download"(on left top side with green colour icon in spflash tool).

8. Now switch off phone and connect to Pc via USB cable.Press twice the volume up button. A slider will run on bottom of spflashtool. If everything fine then you will see a pop up with green tick.

9. Disconnect phone from PC. Press Volume up and Power button till recovery comes on the screen(This is important step,don't boot into normal mode,after flashing recovery you have to direclty go to recovery mode by pressing Volume up + Power button similtaneously).

10. Select "Install"

11. Select file

12. Swipe right to confirm flash

13. Reboot the device.

14. check root status with any root checker app.

Now phone is rooted.Cheers!!

Note:Things to be noted:

**Don't install any driver except above two,if installed already then uninstall driver and residuals using iobit uninstaller,reboot pc then install both drivers given above.

**During driver install click on "install anyway" on each popup

**Enable usb debugging on phone  
Settings → Developer options → tick on USB Debugging(In case you don’t see developer options in your settings ,Open Settings→”About phone” and tap “Build number”  7-8 times to get “You are now  Developer option”

**If quick boot enabled on phone,then disable that by unticking "Quick startup" option in "accessibility settings"

if you have any question regarding this tutorial feel free to ask us. ☺

Tags : Coolpad Note 3 Lite, root coolpad note 3 lite, root coolpad note 3 lite with pc, root coolpad note 3 lite without pc,custom recovery for Coolpad note 3 lite.

Share this

Related Posts

Next Post »